SHARP TV
2 posters
AELEXIAN EMPIRE :: Analog and Mixed Signal Device Repair (Electronics Technician Board) :: LIST OF LCD/LED TV SERVICE MODE
Page 1 of 1
SHARP TV
by ultrasonic™ Sun Jul 22, 2018 11:37 am
Entering and cancel the adjustment process mode
1) While holding down the INPUT and Volume DOWN keys at the same time, plug in the AC cord to turn on the power. (“K” standing for inspec- tion process mode is displayed on the upper left position of the screen.)
2) Press the Channel DOWN and Volume DOWN keys at the same time. (The adjustment process mode screen appears.)
3) To cancel it, turn off the power using the Power switch or remote control.
1) While holding down the INPUT and Volume DOWN keys at the same time, plug in the AC cord to turn on the power. (“K” standing for inspec- tion process mode is displayed on the upper left position of the screen.)
2) Press the Channel DOWN and Volume DOWN keys at the same time. (The adjustment process mode screen appears.)
3) To cancel it, turn off the power using the Power switch or remote control.
ultrasonic™- 24V BATTERY
- Posts : 4475
Join date : 2010-08-19
Age : 38
Location : Davao City
Re: SHARP TV
by Hertz Sun Oct 13, 2019 1:57 pm
Sharp
Menu, 1999
Menu, 3481
Menu, 1147
While holding [ VOL– & INPUT ] buttons on TV plug in set when
“K ” appears push (VOL– & CHANNEL-)
Menu, 1999
Menu, 3481
Menu, 1147
While holding [ VOL– & INPUT ] buttons on TV plug in set when
“K ” appears push (VOL– & CHANNEL-)
Hertz- Admin
- Posts : 1822
Join date : 2010-08-12
Age : 43
Location : Cagayan De Oro City
Re: SHARP TV
by Hertz Sun Oct 13, 2019 2:08 pm
SHARP JOYSTICK
To Enter Service Mode & clearing lamp error.
Long press input & power button manual switch
Wait Led blink into yellow green & red indicator
Press up,dwn,up sa button
Then tv display in gray color,
Long press input button until service mode will appear.
To Enter Service Mode & clearing lamp error.
Long press input & power button manual switch
Wait Led blink into yellow green & red indicator
Press up,dwn,up sa button
Then tv display in gray color,
Long press input button until service mode will appear.
Hertz- Admin
- Posts : 1822
Join date : 2010-08-12
Age : 43
Location : Cagayan De Oro City
Hertz- Admin
- Posts : 1822
Join date : 2010-08-12
Age : 43
Location : Cagayan De Oro City
Re: SHARP TV
by Hertz Sun Oct 13, 2019 2:13 pm
Sharp Aquos LC Series Hard Reset....
applicable for Joystick buttons...
push power & input source simultaneously, apply AC...
while LED blinking, use stick... Up Down Up followed by Input Source 4 seconds long press....
SM appears... select Factory INIT...move stick left....screen appears in green display....
disconnect AC to save....GudLuck..
applicable for Joystick buttons...
push power & input source simultaneously, apply AC...
while LED blinking, use stick... Up Down Up followed by Input Source 4 seconds long press....
SM appears... select Factory INIT...move stick left....screen appears in green display....
disconnect AC to save....GudLuck..
Hertz- Admin
- Posts : 1822
Join date : 2010-08-12
Age : 43
Location : Cagayan De Oro City
Similar topicsAELEXIAN EMPIRE :: Analog and Mixed Signal Device Repair (Electronics Technician Board) :: LIST OF LCD/LED TV SERVICE MODE
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum